Prev
Magnetic Stripe Card Reader
PRODUCT CODE : PO0800-001
FEATURES
- Low cost solution for triple track readers
- No more mill volt-level analog signals to route, no analog signals leave the shielded magnetic head! Withstands noisy
- PC monitors, cell phones, switching power supplies, etc.
- High performance decoding: New design reads badly damaged cards, compensates for poor head mounting
- AGC (Automatic Gain Control) Reads cards from 30%~200% of ISO 7811 amplitude standard
- No Windows driver needed! MSR Configuration Utility fast and easy to use!
DESCRIPTION
- Low cost solution for triple track readers
- High performance decoding
- Magnetic card reader comply with ISO standards
- Available for KB wedge, RS-232 ,HID USB interface, virtual com USB, TTL
SPEC
- Interface: Keyboard Wedge/RS232C /Serial TTL /USB (HID Keyboard Emulation) /USB (Virtual serial port)
- USB Driver to create a virtual serial port (RS-232), Half-Duplex, Data bits=8, Parity=None, Stop bits=1, Baud rate=2400~19200 bps (Default: 19200 bps)
- Compatible with USB specification Revision 1.1
- Software virtual serial port Driver support Microsoft Windows 98/ME/2000/XP. Linux driver for Red Hat 7.3/8.0/9.0 Only
- OPOS & JPOS Driver support
- Card Swiping Speed:
- Card speed through the unit may vary from 3 ips to 100 ips (7 cm/sec. to 250 cm/sec.)
- Dimension: L98.3xW30.3xH31.2 mm with cover
- Power Requirements: DC+5V+/-10% (Power supplied by keyboard or USB interface)
- Power Consumption: 50mA max.
- Color: Black or White
- Lift
- Electronics: 125,000 hours
- Head: 1,000,000 passes
- Environment
- Operating Temp: 0~+ 55 °C
- Storage Temp: -10~+ 65 °C
- Humidity: 10~90 relative
-
FEATURES
- Low cost solution for triple track readers
- No more mill volt-level analog signals to route, no analog signals leave the shielded magnetic head! Withstands noisy
- PC monitors, cell phones, switching power supplies, etc.
- High performance decoding: New design reads badly damaged cards, compensates for poor head mounting
- AGC (Automatic Gain Control) Reads cards from 30%~200% of ISO 7811 amplitude standard
- No Windows driver needed! MSR Configuration Utility fast and easy to use!
-
DESCRIPTION
- Low cost solution for triple track readers
- High performance decoding
- Magnetic card reader comply with ISO standards
- Available for KB wedge, RS-232 ,HID USB interface, virtual com USB, TTL
-
SPEC
- Interface: Keyboard Wedge/RS232C /Serial TTL /USB (HID Keyboard Emulation) /USB (Virtual serial port)
- USB Driver to create a virtual serial port (RS-232), Half-Duplex, Data bits=8, Parity=None, Stop bits=1, Baud rate=2400~19200 bps (Default: 19200 bps)
- Compatible with USB specification Revision 1.1
- Software virtual serial port Driver support Microsoft Windows 98/ME/2000/XP. Linux driver for Red Hat 7.3/8.0/9.0 Only
- OPOS & JPOS Driver support
- Card Swiping Speed:
- Card speed through the unit may vary from 3 ips to 100 ips (7 cm/sec. to 250 cm/sec.)
- Dimension: L98.3xW30.3xH31.2 mm with cover
- Power Requirements: DC+5V+/-10% (Power supplied by keyboard or USB interface)
- Power Consumption: 50mA max.
- Color: Black or White
- Lift
- Electronics: 125,000 hours
- Head: 1,000,000 passes
- Environment
- Operating Temp: 0~+ 55 °C
- Storage Temp: -10~+ 65 °C
- Humidity: 10~90 relative
INQUIRE US
Feel free to inquire our products. We are willing to help you with any issues you may encounter with our products.